LOCK ONE-LINE COMMAND

The Lock One-Line command in the Main Window is designed to prevent the user from modifying the graphical one-line diagram and from deleting or adding network elements.  Subsequent executions of this command toggle the locked and unlocked status.

Even when the one-line is locked, the user can still:

•      modify parameters of network elements

•      take network elements in/out of service

•      add relay groups

•      add protective devices and logic schemes to relay groups

•      modify parameters of protective devices and logic schemes.

•      delete protective devices and logic schemes

•      delete relay groups

The lock/unlock option is saved within the olr file.

TO LOCK THE ONE-LINE GRAPHICS:

1.    Select the Diagram | Lock One-Line command.

When locked, the words “1-Line locked” will appear in the status area near the bottom of the Main Window. In addition, a checkmark will appear next to the Lock One-Line menu item.

TO UNLOCK THE ONE-LINE GRAPHICS:

1.    Select the Diagram | Lock One-Line command again.

Main Window